Webbing

---

Webbing/Mesh - Rattan

 This material is pre woven and can be used in a number of applications, including some Commercial Projects, but is more commonly used in chair seats and door panels.
We stock Open Weave Natural Rattan Webbing and 
Close Knit Weave, Herringbone Weave,
& Radio Weave ( Fire Rating 2 )
 
Rattan Webbing is generally used for DIY re caning chair seats and backs. You can apply shellac, stain or paint to finish, however leaving the Rattan Webbing in its natural state is best. The webbing however will darken slightly with age and sunlight.
Soak in warm water no longer than 30 mins, then drip dry before fitting. Soaking for longer periods can weaken and darken the cane strands. See instructions below under pre woven diy kits.
​
1/2" Open Weave Rattan Webbing
450 mm wide $95.00 per metre 
610 mm wide $103.00 per metre Limited Stock

Close Knit Weave Rattan Webbing
610 mm wide $90.00 per metre

Herringbone Weave Rattan Webbing
500 mm wide $100.00 per metre
​610 mm wide $109.00 per metre

Radio Weave Rattan Webbing 
450 mm wide $78.00 per metre 
610 mm wide $85.00 per metre 
​

To Order CLICK HERE

CLICK ON IMAGES ABOVE FOR DESCRIPTION

---

Pre Woven D.I.Y. Kits

For seats with a groove around the seat frame.
Need to re cane your broken seat, then these Pre Woven Chair Cane D.I.Y. Kit is for you. Starting at just $41.50
It comprises of: Open Weave Rattan Webbing/Mesh 
Round Core/Reed (Spline), Instruction Sheet and
Wooden Tool to help with fitting webbing into groove. 
PLEASE NOTE: When ordering, please add approx 50 mm overhang.  And not all chair seats have the same size groove to house the cane spline. 
So please check the width of the groove before ordering.
Generally 5 mm groove, use 4 mm Spline. 6 mm groove, use 5 mm spline.
​Select the correct size DIY Kit:  CLICK HERE
Instructions: CLICK HERE
To Order CLICK HERE

Pre Woven DIY Chair Cane Kit